Bair Customs

1969 PLYMOUTH HEMI ROADRUNNER

1969 PLYMOUTH HEMI ROADRUNNER PRO TOURING

ENGINE: 528CI Muscle Motors Hemi 611HP & 633 lb-ft torque

FUEL: F.A.S.T. Fuel Injection Kit/Rock Valley Custom Fuel Tank

IGNITION: MSD

TRANSMISSION: Keisler Engineering Tremec 5 Speed Manual Overdrive Transmission Kit

SUSPENSION: Reilly Motorsports Alterktion Front Suspension Kit w/Power Rack/ Hotchkis Rear Suspension Kit

BRAKES: Wilwood 6 Piston Brakes/Hydroboost Power Assist

DIFFERENTIAL: Moser DANA 60 Rear 3.73 Gear w/Posi

COOLING: Mark 7 Custom Aluminum Radiator w/Spal Fans

EXHAUST: TTI Exhaust Custom 3” X Pipe w/Ceramic Coated Headers

STEREO: Kenwood AM/FM/CD/IPOD/SIRIUS

A/C-HEATER: Classic Auto Air Custom A/C Heating System

BODY AND PAINT: Candy Shop Customs/ Big Hemi, Inc.

EXTERIOR: Sherwin Williams Automotive Finishes/Planet Color-Barrett Jackson “Back in Black”

CHROME: Reckon Plating Custom Chrome Grille Assembly

INTERIOR: Hush Mat/ Painless Wiring/ Thomas Interiors Black Custom Leather Interior w/Carbon Fiber Accents…Instrument Specialties Silver Faced Gauge Cluster

WHEELS AND TIRES: Boze Custom Mesh Wheels w/Mickey Thompson Tires

DECALS SIGNAGE: Hightech Signs

This 69 Plymouth Roadrunner has style and attitude by the bucket load and is a perfect candidate for a Pro Touring Custom. It isn’t just Mopar fans chasing their dream. Ford guys, GM guys and import collectors alike all regularly have one of these in their collections. It’s no wonder it was Motor Trends Car of the year in 1969.

Given this is a Pro Touring Star, let’s begin with the performance bits. The engine is none other than a 528 Aluminum headed, Stroker Hemi custom built by Muscle Motors Racing, making 611 HP and 633 lb-ft of torque which will scream its occupants past 150 MPH. The Keisler Engineering 5 Speed Manual Overdrive Transmission kit with a deep throw shifter sticking out of the tunnel will pace through the gears with flair. Putting the rubber to the ground is a new Moser DANA 60 with a huge drilled and slotted 6 piston Wilwood Brake System and Hotchkis rear suspension kit. The Dana 60 is beefed up with 35 spline axles, a Posi, and 3.73 gears. Up front is a complete Reilly Motorsports AlterKtion/power steering/sway bar with a front tubular K member and adjustable coil over shocks. The suspension on this car is state-of-the-art. Try getting an original 69 Roadrunner to handle this good and 100+ mph speeds. The brake system is supplied with 6 piston drilled and slotted Wilwood Brake’s and Hydroboost/ Wilwood Power Master Cylinder Kit. Hold on to the Flaming River tilt column steering wheel and enjoy the journey.

The spectacular wheels are provided courtesy of Boze Alloys Mesh 20” X 10” in the rear wells, and 19” X 8.0” up front. Mickey Thompson Performance Tires will help with the traction and handling. This wheel and tire package is second to none with its combination of performance and style.

Helping the Hemi breathe is a complete TTI Exhaust System, with polished ceramic coated headers, and a 3” X pipe exhaust system with Flowmaster Super 44 Mufflers, and 3” tips.

When it comes to the fuel, cooling, ignition, and electrical components, only the industry’s top companies were utilized. Fuel for the Hemi is supplied by F.A.S.T. fuel injection kit. The fittings and lines, which plumb the fuel system, are from Summit Racing, JEGS High Performance and Inline Tube. Cooling is performed by a large aluminum radiator with auto electric fans from Mark 7 Radiator. I would not anticipate any overheating troubles with this fire breathing monster. MSD Digital 6 box with Blaster Coil, Billet Distributor, and new plug wires fire the big Hemi. Painless wiring kit was professionally wired throughout the car, and March Performance Serpentine System with 105 amp alternator,and power steering. If you notice inside the engine compartment, time was taken to give it a very clean look. All of the inner panels were filled and smoothed, and the plumbing and wiring was nicely hidden inside the inner fenders to get that no clutters feel and look.

The exterior of this project began as a stock 1969 Plymouth Roadrunner. After little discussion, the car was entirely stripped and prepped for body and paint. All new glass was inserted around the cabin with help from AMD. We teamed up with Wade @ The Candy Shop Customs for body and paint. Hours and hours of body work was performed on the panels to get them very straight. The exterior panel gaps are done to laser straight perfection, and are in perfect alignment. The car was painted “Back in Black”/Sherwin Williams/Planet Color. The 2-stage urethane looks miles deep. The chrome, trim and brightwork, of course, is straight off of the showroom floor, and shines brilliantly against the black finish. Check out the custom chrome front grille assembly with H4 headlights peeking at you. When building a custom car like this, you can’t forget all of the small details. Something as simple as sandblasting and re-painting a hood latch just adds more perfect fit and finish to a car. Powder coating the suspension pieces adds beauty and durability. You will also notice all of the stainless fasteners throughout the entire car. Stainless bolts were used on the project for long life.

Slip inside and you will quickly see that much of the interior was kept to stock appearance with the help of Thomas Interiors and Instrument Specialties. These Roadrunner’s were as beautiful from the inside as well as the out, and we didn’t want to mess too much with a proven design. Yards and yards of hush mat was applied to the inner panels to help keep out the sound, heat, and smell. Silver faced gauges were inserted into their respective slots and make a nice show. The wiring on the car was completely re-wired with a Painless 18 circuit kit. The custom tilt Flamming River steering column attached to a custom steering wheel feels just right in your hands. The custom upholstered seats are wrapped in leather and give a hint of modern style with matching comfort. Carbon Fiber accents were added for a modern touch. A complete restoration of the original dash, heater controls, and gauge cluster was also completed, and all the controls operate flawlessly. Enjoy the custom IPOD and CD stereo and blast the music out with some killer speakers. The Classic Auto Air Heater-A/C system is controlled by the original factory sliders. The custom upholstered and carpeted trunk adds a nice finishing touch to the project.

Copyright Bair Customs. All rights reserved · Formerly Big Hemi Customs · Affordable Websites by PC Plus